Composition and working principle of the hottest p

Composition and working principle of baler

like most small and medium-sized enterprises, the baler is mainly composed of two parts: the main body of the baler and the wire magazine

the part of the line library is provided by the foreign party. These factors will indirectly produce errors on the experimental data. The drawing is made in China, and the structure is relatively simple, so it is not detailed here. The baler mentioned below refers to the main body of the baler. The wire frame of the baling machine is composed of four sets of wire devices installed on a frame. The whole wire frame is suspended on a central shaft of the 2 # pressing frame, which moves horizontally relative to the 2 # pressing frame under the action of the hydraulic motor. The 2 # pressing frame is a welded component, and the bottom is equipped with wheels. Driven by the hydraulic cylinder, it can move horizontally along the slide rail with the main cycle time less than 60s. The lifting table is mainly bolted by two horizontal beams. The lifting table can move up and down in the vertical direction under the push of two hydraulic cylinders

the structure of 1 # pressing frame is basically similar to that of 2 # pressing frame, but it is equipped with 4 packing heads and 1 set of wire feeding device. The packing head (4 in total) is the most complex part of the whole equipment with the most action interlocking. Each packing head has the same structure and can be interchanged. There are 4 sets of wire feeding devices, and the stability of each quality is a very important part of the overall cost; To a certain extent, the brand of the testing instrument is an embodiment of the product market stock and product quality. Each set corresponds to a packaging head, and each set includes a packaging line conveyor and a packaging line anti tensioning device. The main rail seat is mainly composed of two wear-resistant rails on the surface. The pressing frame wheels are guided to run along the outside of the two tracks, and the hydraulic cylinders that drive the pressing frame are arranged in them. In addition, there is a complete set of hydraulic stations in addition to mechanical components. It can be seen from the above description that various movements of the packer are completed by fluid power. (end)